-
1. Fish-Specific Safety Do Not Exceed Recommended Dosage: Overdosing can stress or harm the koi, potentially leading to long-term damage or death. Monitor Constantly: Never leave the koi unattended during sedation or recovery. Watch for signs of excessive sedation, such as extremely slow or no gill movement. Limit Sedation Duration: Do not leave koi in the anesthetic solution for more than 15 minutes unless euthanizing. Ensure Recovery: After sedation, transfer koi to fresh, well-aerated water immediately. Monitor until full recovery. 2. Preparation and Handling Temperature Match: Always prepare the anesthetic solution using water at the same temperature as the koi’s tank or pond to prevent temperature shock. Proper Mixing: Thoroughly mix the solution to ensure even distribution of the anesthetic. Use Clean Equipment: Ensure containers and tools are clean to avoid introducing contaminants to the solution or fish. 3. Human Safety Avoid Skin Contact: Use gloves when handling SedateSafe to avoid skin irritation. Prevent Eye Exposure: If splashed into the eyes, rinse thoroughly with clean water and seek medical attention if irritation persists. Ventilation: Use the product in a well-ventilated area to avoid inhaling vapors or fumes. Keep Away from Children and Pets: Store securely and out of reach to prevent accidental exposure. 4. Environmental Considerations Disposal: Dispose of unused anesthetic solution and empty containers responsibly. Do not pour it directly into natural water bodies, as it may harm other aquatic life. Spills: Clean up any spills immediately and thoroughly to avoid environmental contamination or accidental exposure. 5. Emergency Preparedness For Overdose: If too much SedateSafe is used, immediately transfer the koi to fresh, well-oxygenated water and monitor closely. Contact a veterinarian experienced in aquatic care if recovery is delayed. Human Exposure: If ingested, do not induce vomiting. Seek immediate medical attention and bring the product label. If irritation or allergic reaction occurs after skin or eye contact, consult a healthcare provider. Key Tips for Safe Use Always measure carefully using appropriate tools (e.g., syringes or droppers) for precise dosing. Start with the lower end of the dosage range, especially for smaller or stressed koi. Avoid using the product on sick or weakened fish unless sedation is necessary for treatment or humane euthanasia.
-
Aqua Meds - SedateSafe Instructions Aqua Meds - SedateSafe Instructions
SedateSafe is designed to provide gentle sedation for koi fish during handling, medical procedures, or to reduce stress during transport. Please follow these instructions carefully to ensure the safety and well-being of your koi.
1. Purpose
SedateSafe is a safe and effective anesthetic specifically formulated for koi. It is ideal for:
- Sedating koi for routine health checks, handling, or minor procedures.
- Humane euthanasia for koi suffering from severe illness or injury (refer to euthanasia section).
- Reducing stress during transport or in stressful environments.
2. Dosage Instructions
For Light Sedation (Routine Handling or Health Checks):
- Dosage: Use 2 ml per gallon of water.
- Procedure: Mix thoroughly into water that matches the temperature of your koi’s pond or holding tank.
- The koi should begin to show signs of sedation (loss of equilibrium) within 2 to 5 minutes.
For Deep Sedation (Minor Surgical Procedures):
- Dosage: 2 mL to 4 mL per gallon of water.
- Procedure: Follow the same mixing instructions as above, but use a slightly higher dosage for deeper sedation.
- Koi will lose all ability to right themselves and will be in a deep, controlled state of anesthesia.
For Humane Euthanasia (In Case of Severe Illness or Injury):
- Dosage: 4 mL to 8 mL per liter of water.
- Procedure: Prepare the solution and immerse the koi completely.
- The koi will lose consciousness quickly and peacefully, followed by cessation of all vital signs.
3. Step-by-Step Instructions
Measure the Solution:
- Add the required amount of SedateSafe to a container of water, ensuring the water is at the same temperature as your koi's environment.
- Mix thoroughly to ensure even distribution.
Introduce the Koi:
- Gently place the koi into the prepared solution.
- Monitor closely. The koi will begin to lose balance and become less responsive as sedation sets in.
Monitor the Koi:
- Light sedation will typically occur within 2–5 minutes.
- For deeper sedation or euthanasia, it may take a little longer.
- Never leave koi in the solution for longer than 15 minutes unless euthanizing, as prolonged exposure can stress or harm the fish.
Recovery (for sedation purposes):
- Once the procedure is complete, transfer the koi to fresh, well-aerated water.
- The koi should begin to recover within a few minutes, regaining full mobility after a short time. Continue to monitor until recovery is complete.
4. Storage Instructions
- Store in a cool, dry place away from direct sunlight.
- Seal tightly when not in use.
- Shelf Life: Please refer to the expiration date on the packaging. Once opened, use within 12 months for best results.
5. Safety Warnings
- For external use only: SedateSafe is for koi fish use only.
- Keep out of reach of children and pets.
- Avoid contact with skin and eyes: If contact occurs, rinse thoroughly with water. If irritation persists, seek medical attention.
- In case of ingestion: Do not induce vomiting. Contact a physician immediately.
- Use only as directed: Overuse or incorrect dosage can harm the fish.
6. Emergency Information
- In Case of Overdose: If you accidentally use too much SedateSafe, immediately transfer the koi to fresh water and ensure proper aeration. Monitor for signs of recovery.
- In Case of Accidental Exposure: Wash the affected area with water. If irritation persists, contact a healthcare provider.
- If Fish Are Not Recovering: If your koi shows no signs of recovery after an appropriate time in fresh water, contact a veterinarian with experience in aquatic life.
-
SedateSafe Faq
-
A: SedateSafe is a safe and effective anesthetic designed for koi fish. It is used for sedating koi during handling, minor medical procedures, transportation, or stress-inducing events. It can also be used for humane euthanasia in cases of severe illness or injury.
-
A: For light sedation: Use 0.3 to 0.5 mL per liter of water. For deep sedation: Use 0.5 to 0.6 mL per liter of water. Mix the solution thoroughly in water at the same temperature as the koi's tank, then gently place the fish in the solution. Monitor the koi closely throughout the process.
-
A: The koi will usually show signs of sedation within 2 to 5 minutes, depending on the dosage and the level of sedation required.
-
A: For sedation, koi should not remain in the solution for more than 15 minutes. Prolonged exposure can harm the fish. For humane euthanasia, the fish should remain in the solution until all vital signs cease.
-
A: Sedated koi will lose their ability to maintain balance and float on their side. Their gill movements will slow significantly, indicating a state of anesthesia.
-
A: After completing the procedure, immediately transfer the koi to fresh, well-oxygenated water and monitor until it regains normal behavior and balance. Recovery typically occurs within a few minutes.
-
A: Yes, SedateSafe can be used for humane euthanasia by using a higher dosage of 1.0 to 2.0 mL per liter of water. The koi will lose consciousness and pass away peacefully. Always confirm the cessation of gill movement before disposal.
-
A: Use gloves to avoid skin contact. Mix in well-ventilated areas to avoid inhaling vapors. Monitor the fish closely during sedation. Dispose of the solution responsibly and avoid environmental contamination.
-
A: Store SedateSafe in a cool, dry place, away from direct sunlight. Keep the container tightly sealed when not in use and out of reach of children and pets.
-
- Is this the right Aqua Meds® product for my sick fish or pond water problem?
- Aqua Meds Dealers
SUBMIT A QUESTION
Can't find what you're looking for? Ask us a question.